| Doc. # 1-0002188 | |||
|---|---|---|---|
| Date Updated | 09-27-2004 | Date Created | 07-27-2000 |
| Document Type | Knowledge Base | Related OS | |
| Related Product | PCN-6351 | ||
| How to connect ATX power switch? | |||
|---|---|---|---|
|
Solution:
To control the ATX power, the switch connect to pin 5&6 of JP1 of PCN-6351.
or pin1&2 of J3 on the backplane PCA-6106NP3. Both way will work.
The power ON signal can be pulled low ( Short to GND)
, while the switch is closed . There is no interaction needed to get
the power ON signal low signal.
Notice ! Please make sure the ATX power has been turned on (the switch on
the power supply should be turned on )
Also, you may refer to the circuit diagram related to the power control
on PCN-6351 and backplane.
PCN-6135 ATX power control :
PCA-6106NP3 ATX power control :
|