Solution:

To use SSD. Please set 1. Set JP 6 and JP7 for the SSD address. 2. Close J2, J3 amd J5 if you need to use SRAM 3. Enable on board SSD form "Peripheral Setup" of CMOS 4. Set Floppy Driver A: to be 1.44MB 3 1/2 form standard CMOS setup. 5. Disable Floppy Drive Seek form "Advantced CMOS setup. If you still have problem you can check 1. You must see the SSD boot rom message while system booting. If not, the jumper or CMOS does not enable the SSD function. 2. Please test the SSD memory chip on the other modle of board first.