Solution:

. ######## Installation in a CPU board ########### The following steps is the procedure of installation: 1. The most easier way is to use FDD boot your syst. DOC 2000 only can be set as 3rd or 4th drive (drive C or D) as the DOC is to simulate a harddisk. I 2. Boot up the system. You should see some information about DOC, like as " Ture FFS - BIOS.....". If not, please check the above steps. If not please use DFORMAT Utility to format the disk. 3. After entering the DOS, Please check your DOC-2000 is formatted already or not. If not, use DOC's command to format it. Then, you can execute DOS commands and DOC-2000's command to use the SSD. Some special commands, which are provided by M-System, are different from the usual flash chips. 3. DOC is default as the first drive after HDD. If you have HDD then it will be default as D: If you need make HHD to be D: , please use "Dupdate.exe" in the utility disk DUPDATE D: /S:DOC106.EXB /First (as drive C:) DUPDATE /S:DOC106.EXE (as drive D:) or DUPDATE /win:C800 /S:DOC106.EXB /First (as drive C:) DUPDATE /Win:C800 /S:DOC106.EXE (as drive D:) Please type DUPDATE to get help