Doc. # 1-0000067
Date Updated 01-22-2004 Date Created 07-27-2000
Document Type Knowledge Base Related OS
Related Product ADAM-4521
If terminating character is not <CR> of ADAM-4521?
Solution:
ADAM-4521 only supports as terminating character, it is impossible to change it. However, we can "disable" terminating character as follows: 1. Send "&AA810" to open data gate. (AA:ID) 2. Transmit your message to RS-232 device, for example "abc" 3. Wait for the response from RS-232 device. 4. Send "&AA800" to close data gate. Note: During data gate open, you can send/receive any character to/from your RS-232 device, just like ADAM-4520 converter.