Solution:

Windows 95/98/NT LAN Drivers Installation The PCA-6176E/F's on-board Ethernet interface supports all major network operating systems. The BIOS automatically detects the LAN while booting, and assigns an IRQ level and I/O address. No jumpers or switches are required for user configuration. The drivers and installation instructions are located in the following directories of the utility diskette/CD: Dos: Drivers for DOS platforms Info: Installation instructions Nwserver: Drivers for Novell NetWare Wfw: Drivers for Windows 3.11 for Workgroups Please refer to the text files in the Info directory for detailed informa-tion about installing the drivers. Note: Operating system vendors may post driver updates on their web sites. Please visit the web sites of OS vendors to download updated drivers. Windows 95/98 LAN Drivers Setup Procedure 1. In the Windows 95/98 screen, click "Start". Select "Settings", and then click the "Control Panel" icon. 2. Click "Next". 3. Click "Next". 4. Click "Next". 5. Follow the instructions on the screen and click "Have Disk". 6. In the "Install From Disk" screen, Click "Browse". 7. Select "net82557.inf" and click "OK". 8. In the "Install From Disk" screen, Click "OK". 9. Click "OK". 10. Click "Next". 11. Click "Finish". 12. In the "System Settings Change" screen, Click "Yes". Windows NT LAN Drivers Setup Procedure Note: You must install your Windows NT drivers before you begin to connect up your LAN wiring. Otherwise LAN irregularities may occur. 1. In the "Windows NT" screen, click "Start" and select "Settings". Then click the "Control Panel" icon to select "Network". 2. In the "Network Configuration" screen, Click "No". 3. Click "Add" to add your new driver. 4. Select "Have Disk" to find the Network Adapters Driver program. 5. In the "Insert Disk" screen, Click "OK". 6. In the "Select OEM Option" screen, Select "Intel(R) PRO Adapter" "