Solution:

Adaptec EZ-SCSI utility Adaptec EZ-SCSI gives you what you need to use your SCSI devices most effectively with Windows 95 and Windows NT. You can also use Adaptec EZ-SCSI on computers running DOS, Windows 3.1x, or Windows for Workgroups 3.1x. Quick Start Instructions First, install the SCSI devices (see the hardware documentation for details). Then follow the instructions for your operating system software in one of the following sections. We recommend that after you install Adaptec EZ-SCSI, you run SCSI Tutor to learn more about the features of SCSI. Windows 95 or Windows NT If you want to install Windows 95 or Windows NT on a new computer system, you may not be able to access your SCSI CD-ROM drive at first. (Usually, you install Windows 95 and Windows NT from a CD-ROM disc.) To gain access to your CD-ROM drive, follow the DOS Quick Start instructions. Then reboot your computer and follow these instructions: 1. Install Windows 95 or Windows NT version 3.51 or above, and start it running on your computer. 2. Insert the Adaptec EZ-SCSI Setup diskette into your floppy disk drive. 3. Click the Start button and select Run. 4. Type a:\setup if you are using the A: drive or b:\setup if you are using the B: drive. Then click OK. 5. Follow the instructions that appear on the screen. Windows / Windows for Workgroups 3.1x 1. Install Windows 3.1x or Windows for Workgroups 3.1x, and start it running on your computer. 2. Insert the Adaptec EZ-SCSI Setup diskette into your floppy disk drive. 3. Select File/Run from the Program Manager menu. 4. When the Run dialog box appears, type a:\setup if you are using the A: drive or b:\setup if you are using the B: drive. Then click OK. 5. Follow the instructions that appear on the screen. DOS 1. Install DOS 6.x or above, and start it running on your computer. 2. Insert the Adaptec EZ-SCSI Setup diskette into your floppy disk drive. 3. At the DOS prompt, type a:\install