Solution:

Windows 3.1/95/NT SVGA Driver Setup Procedures Installation SVGA Driver for Windows 3.1 Step 1 a. Insert the utility disk into the Floppy disk drive. b. Select "File" in Program Manager. c. Click "Run" and type:"A:\VGA\Win31\Setup.exe". Step 2 a. Choose the language you want to use during installation. Step 3 a. Select the highlighted item. b. Press "ENTER". Step 4 a. Press "ENTER" to install all resolutions. Step 5 a. Type the path of the operating system. Step 6 a. When installation is completed, reboot the system. b. You will see the "ChipsCPL" icon in the control panel. Step 7 a. Double click "ChipsCPL". b. Adjust screen size, color and refresh rate to your preferences. END Installation SVGA Driver for Windows 95 Step 1 a. Select "Start", "Settings", "Control Panel", "Display", "Settings". b. Press "Advanced Properties". Step 2 a. Choose the "Adapter" label. b. Press the "Change..." button. Step 3 a. Press the "Have Disk" button. Step 4 a. Insert the utility disk into the Floppy disk drive. b. Type:"A:\VGA\Win95\Setup.exe". c. Press "OK". Step 5 a. Select the highlighted item. b. Click the "OK" button. Step 6 a. C&T69000/69030 appears in the adapter label. b. Click the "Apply" button. Step 7 a. Press "Yes" to reboot. Step 8 a. Repeat Step 1 on the previous page of this manual. The "CHIPS" label appears in "Display". b. Adjust resolution and color. Step 9 a. Click the "CHIPS" label. b. Adjust the refresh rate and display type. c. Press "OK" to exit. Step 10 a. Press "Yes" to set the monitor type. Step 11 a. Select "Standard", "Super VGA 800 x 600", or "XGA". b. Press the "OK" button. Step 12 a. Choose "Restart" to reboot. END Installation SVGA Driver for Windows NT Step 1 a. Select "Start", "Settings", "Control Panel". b. Double click the "Display" icon. Step 2 a. Choose the "Settings" label. b. Press the "Display Type" button. Step 3 a. Press the "Change..." button. Step 4 a. Click the "