| Doc. # 1-0003417 | |||
|---|---|---|---|
| Date Updated | 07-27-2005 | Date Created | 07-27-2000 |
| Document Type | Knowledge Base | Related OS | |
| Related Product | |||
| Need to use mono CRT | |||
|---|---|---|---|
|
Solution:
The C&T and SiS VGA controller cannot support mono card directly. You need to
plug in a mono card on the ISA slot. Please choose "MONO" VGA form the
standard CMOS setting, then reboot system. Note that C&T chipset cannot boot
with mono card. It need to modify special BIOS. This BIOS map INT 10 twice to
the memory. Please check the following
As for PCA-6154 SiS VGA controller. You only need to set "MONO" from standard
CMOS setting, then it will works fine.
|