| Doc. # 1-0003120 | |||
|---|---|---|---|
| Date Updated | 03-17-2004 | Date Created | 07-27-2000 |
| Document Type | Knowledge Base | Related OS | NT4.0/ Win95/ Win98 |
| Related Product | PPC-150 | ||
| The SAW touchscreen doesn't work on the PPC-150T after installing the Elotouch driver. There is no | |||
|---|---|---|---|
|
Solution:
Firstly, please make sure you have tear off the screen protected plastic which
is sticked on the screen. Secondly, please check if your driver installed on
COM4.
Helpful debug tips are listed as follows:
1.Double checking the PPC-150 is SWA model, not resistive model.
2.Please check that all the wires and connectors are connected firmly if you
ever disassembled it. (The PISA extension card
has to be installed well specially)
3.Confirm the hardware comports (COM1to COM4, touchscreen uses the COM4) have
been installed.
4.Install the ELOtouch driver, and follow the pages from page 130 to page 132
of PPC-150 users manual.
5.Make sure the screen-protected plastic layer has been torn off.
|