Solution:

Windows 3.1/95/98/NT SVGA Driver Setup Procedures Introduction The PCN-6351 has an on-board PCI flat panel/VGA interface. The specifications and features are described as follows: Chipset. The PCN-6351 uses a C&T 69000 chipset for its PCI/SVGA controller. It supports many popular LCD, EL, and gas plasma flat panel displays and conventional analog CRT monitors. The 69000 VGA BIOS supports monochrome LCD, EL, color TFT and STN LCD flat panel displays. In addition, it also supports interlaced and non-interlaced analog monitors (color and mono-chrome VGA) in high-resolution modes while maintaining complete IBM VGA compatibility. Digital monitors (i.e. MDA, CGA, and EGA) are NOT supported. Multiple frequency (multisync) monitors are handled as if they were analog monitors. Display memory With on-board 2 MB display memory, the VGA controller can drive CRT displays or color panel displays with resolutions up to 1024 x 768 at 64 K colors. Installation SVGA Driver for Windows 3.1 Step 1 a. Insert the utility disk into the Floppy disk drive. b. Select "File" in Program Manager. c. Click "Run" and type:"A:\VGA\Win31\Setup.bat". Step 2 a. Choose the language you want to use during installation. Step 3 a. Select the highlighted item. b. Press "ENTER". Step 4 a. Press "ENTER" to install all resolutions. Step 5 a. Type the path of the operating system. Step 6 a. When installation is completed, reboot the system. b. You will see the "ChipsCPL" icon in the control panel. Step 7 a. Double click "ChipsCPL". b. Adjust screen size, color and refresh rate to your preferences. END Installation SVGA Driver for Windows 95/98 Step 1 a. Select "Start", "Settings", "Control Panel", "Display", "Settings". b. Press "Advanced Properties". Step 2 a. Choose the "Adapter" label. b. Press the "Change..." button. Step 3 a. Press the "Have Disk" button. Step 4 a. Insert the utility disk into the Floppy disk drive. b. Type "A:\VGA\WIN95\" i