Doc. # 1-0002906 | |||
---|---|---|---|
Date Updated | 03-17-2004 | Date Created | 07-27-2000 |
Document Type | Knowledge Base | Related OS | NT4.0 |
Related Product | PPC-120/ PPC-140/ PPC-150 |
How to install PCL-746+ in PPC 120/140/150 serial products? | |||
---|---|---|---|
Solution:
Before installing PLC-746+ card, please make sure the main board of PPC is
version B2.
To set up PCL-746+ card in PPC, card driver ICOM should be installed first.
Next, configure the I/O addresses of the card,
and then change the registry default setting value of Windows NT. Please
refer to the following installation procedure for details.
Step 1: Extracting PLC-746+ driver file "ICOM.ZIP", and then run "setup.exe"
exectuable file to install it in PPC.
Step 2: Executing the "ICOM" utility.
Step 3: Selecting PCL-746 card in the "Board Type" item.
Step 4: Adding new COM port from COM 5 to COM 8 and then click "EXIT" to quit
ICOM utility.
Step 5: Executing "regedit.exe" in the registry to modify default setting
value. Please click "Start" button
and select the "Run" item. Under the windows, enter the command
"regedit.exe" to launch the
registry window.
Step 6: Finding the "Serial" folder, please follow the order to click the
folder step by step.
HKEY_LOCAL_MACHINE => SYSTEM => CurrentControlSet => Serial
Step 7: Modifying the value of "ShareInterrupt" from o to 1.
Step 8: Reboot WinNT to activate the new setting values.
Notes: It is necessary to upgrade the Service Pack of WinNT to version 3 or
above, otherwise, "ShareInterrupt" won't be
generated in the registry directory.
|