Solution:

[Description]: 1. What is the current running through the dry contact 2. I want to use the ADAM-6050 as a wet contact and could you tell me how much is the current that can support for the INPUTS . 3. Is there a limitation how fast it can be switched the Wet contact between Low and High level? [Solutions]: 1. The dry contact for the ADAM 6050, the current is about 4~5mA, but it also depends on the matched resistor. 2. The input current should not be greater than 30mA. 3. The limitation for the low/high switching frequency should not over 10k hz. Thanks