Solution:

It is no doubt that the PCI-1710 can achieve the 100KHz spec. We think the point is you need to enable the FIFO when the sampling rate is higher than 1KHz. Base on our experience, sometimes the system will dead if we give it interrupt event in rate higher than 1KHz. So the best way to verify this case is: 1, Using the example "C:\Program Files\Advantech\ADSAPI\Examples\VC\Madintf\" 2, Enable the FIFO, and set the FIFO size as 2048 3, Set the sampling rate as 100KHz. 4, Set the 'Conv.#' as times of 4096, for example 409600.