| Doc. # 1-00001003 | |||
|---|---|---|---|
| Date Updated | 10-26-2018 | Date Created | 09-12-2017 |
| Document Type | Knowledge Base | Related OS | |
| Related Product | GUCE51 | ||
| What conductors are used on the Cat5 cable between the two units of the GUCE51 | |||
|---|---|---|---|
|
Solution:
The GUCE51 from IOGEAR uses 4 conductors on the RJ45 cable between the two halves of the GUCE51 Since the standard RJ45 cable connection is straight through, the connections below would be straight through. For the GUCE51 the pin assignment as follows: Pin 4 & 5 ---- Transmits USB signal. Pin 3 for power, Pin 6 for ground. Thank You, Randall IOGEAR Technical Support
|