| Doc. # 1-00000676 | |||
|---|---|---|---|
| Date Updated | 10-26-2018 | Date Created | 09-12-2017 |
| Document Type | Knowledge Base | Related OS | |
| Related Product | ABDG-SE-DP501/ ABDG-SE-DP553/ ABDG-SE-IN5410/ ABDG-SE-IN5420/ ABDN-SE-IN5410/5420/ WLNG-SE-DP551/ WLNN-SE-DP551 | ||
| How do I enable and use PPP on my Airborne serial devices | |||
|---|---|---|---|
|
Solution:
The serial-default setting now has a PPP option, as well as CLI, LISTEN, and PASS. PPP mode is mutually exclusive with any of the other serial data modes. The web configurations for these settings are on the serial port pages. This requires a client that supports PPP connected to the serial port. The commands that can be use when in PPP mode: ppp-idle-timeout: Configures the PPP Idle Timeout value of the PPP serial interface of the module if PPP is enabled. The timeout value is in the range of 0 - 600 seconds and is the number of seconds of inactivity after which the PPP connection will terminate and restart. A value of 0 disables the idle timeout function. ppp-local-ip: Configures the local IP address of the PPP serial interface of the module if PPP is enabled. This is the address that the serial interface of the module will adopt. ppp-remote-ip: Configures the remote IP address of the PPP serial interface of the module if PPP is enabled. This is the address that the remote device on the PPP connection will adopt.
|