| Doc. # 1-00000984 | |||
|---|---|---|---|
| Date Updated | 10-26-2018 | Date Created | 09-12-2017 |
| Document Type | Knowledge Base | Related OS | |
| Related Product | 485DRCI | ||
| What is the steady state bias voltage on the 485DRCi | |||
|---|---|---|---|
|
Solution:
When the 485DRCi is set to 2 wire RS-485 mode , and one bias switch is on and the other off, ( sw 6,7 ) then the measured bias voltage across terminals, B, and C , with no data being sent is about 5.8 V
|